911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
2. Position servo pump wheel
a. Put on the servo pump wheel together with the drive belt.
b. Slightly tighten the three fastening screws on the servo pump wheel.
3. Tension drive belt
Note:
^
It is absolutely necessary to check that the drive belt is correctly seated on all belt pulleys!
a. To tension the drive belt, turn the tensioning roller -7- in clockwise direction and simultaneously fit the drive belt on the deflection roller -8-.
b. Then slowly relieve. To do this, turn the tensioning roller slowly anti-clockwise.
4. Tighten fastening screws on servo pump
Tighten the fastening screws of the servo pump drive wheel.
Tightening torque: 23 Nm (17 ft. lbs.)
5. Install air cleaner assembly
Install air cleaner assembly completely.
a. Attach connector onto mass air flow meter.
b. Tighten the hose clamp on the throttle body.
c. Tighten the M6 x 34 hexagon-head bolt to 10 Nm (7.5 ft. lbs.)