911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Fuel Filter: Service and Repair
Replacing Fuel Filter
Removing fuel filter
1. Disconnect plug on the hot film mass air flow meter.
To do this, push the plug downwards and press the grooved surface at the sides. Pull the plug up and off at the same time.
2. Pull off the connecting hose between the left turbocharger and the intake pipe. To do this, unclip the retaining clip using a screwdriver and pull out
the hose. Refit the retaining clips immediately.
3. Unscrew the fastening screw M6 x 34 at the rear of the air cleaner housing.
4. Undo hose clamp. Undo the hose clamp -arrow- between the air cleaner housing and the intake pipe.
5. Tilt air cleaner housing outwards. To do this, tilt the housing upwards on the right by 90 degrees and then turn the housing to the left by approx.
90 degrees.