911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-215001.png)
Wheel Fastener: Specifications
Wheel to wheel hub ***
Screw in wheel bolts by hand and then tighten evenly. Start at the top when tightening.
Thread M14 x 1.5 ........................................................................................................................................................................ 130 Nm (96 ftlb.) *** 1)
1) *** Thinly grease thread, shank and under head (between screw head bearing surface and spherical cap ring) of the wheel bolts with Optimoly TA
(aluminum paste). Do not grease bearing surface of the spherical cap facing the wheel. If heavily contaminated, clean bolts first with a lint free cloth.
