911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
![background image](/porsche/911_turbo_s_cabriolet_(996)/f6-3.6l_turbo/Page-736001.png)
Clockspring Assembly / Spiral Cable: Service and Repair
Removing And Installing The Contact Unit
Installing contact unit
1. Remove the airbag steering wheel.
2. Undo and remove the panel.
3. Undo the -fastening screws- of the contact unit.
4. Pull forward and disconnect the electrical plug connections.
5. Remove the contact unit.
NOTE:
-
To prevent unintended rotation of the contact unit (KE) when the steering wheel has been removed, the contact unit locks itself when the
steering wheel is pulled back.
-
Likewise, the contact unit unlocks automatically when the steering wheel is refitted.
Installing contact unit
1. Front wheels still unchanged in straight-ahead position.
2. Ensure that the exact centre position -(arrows)- of the contact unit is maintained.