911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Removing Solenoid and Control Valve
Removing solenoid and control valve
1. Pull off plastic cover - 1 or 2 in overview.
2. Unscrew screw -3 in overview-, remove leaf spring -5 in overview- and pull out solenoid or control valve -6 to 11 in overview- if necessary with a
pair of pliers.
Installing Solenoid and Control Valve
Installing solenoid and control valve
1. Press in new magnet or control valve -6 to 11 in overview-. Ensure correct seating.
2. Fit leaf spring -5 in overview- and screw in screw -3 in overview-.
3. Fit plastic cover -1 or 2 in overview-.