911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
Note:
^
Since the drive shaft can be moved only using great force, loosen the shaft inwards with taps on a copper mandrel! For unfavorable tolerances, the
drive shaft must be pressed out of the toothing using a universal wheel-hub extractor! See step 9 also.
1. Lift the vehicle. Remove the wheel and undo axle nut -arrow-. Actuate the foot brake and parking brake for this purpose.
2. Push the protection -arrow- over the drive shaft.
3. Undo the drive shaft on the transmission flange.
4. Unscrew the lower linkage for the headlight height adjustment -arrow- (counter with open-ended wrench). Only on left side!
5. Loosen stabilizer mount -arrow- at stabilizer (counter with open-ended wrench).