911 Turbo S Cabriolet (996) F6-3.6L Turbo (2005)
/f6-3.6l_turbo/Page-492011.png)
6. Screw on the stabilizer mount -arrow-. Counter with an open-ended wrench when doing this.
7. Screw on the lower linkage for the headlight height adjustment -arrow- (counter with open-ended wrench). Only on left side!
8. Mount the drive shaft with spacer ring on the transmission flange.
9. Remove the drive shaft protection -arrow-.
10. Tighten the axle nut. Fasten the wheel.