924 L4-1983cc 2.0L SOHC (1982)
Wheels: Technical Service Bulletins
Wheels - Install Spacers to Widen Rear Axle Track
Subject:
Wheels
Part Identifier 44 05
Applies To
924
924 TURBO
Group
44
Key Points
Installing spacers to widen rear track
C
Number
83-02
February 18, 1983
There is no technical objection to widening the rear axle track on Porsche 924 cars using spacer plates.
Complete conversion kits for widening each wheel track by 15 mm (Part No. 477 698 153A) or 28 mm (Part No. 477 698 154) are available as
accessories.
CAUTION
Conversions should only be made on cars which are in a good mechanical condition. The procedures must be carried out correctly using only original
Porsche rereplacement parts.
Note
All Porsche parts can be identified by the Porsche part number as well as the registered official Porsche emblem.
Parts in kits:
Kit No. 477 698 153A (15 mm)
2 Spacer plates 8 Wheel bolts 1 Wheel bolt wrench
Part number cast in the spacer plates:
