924 S L4-2479cc 2.5L (1986)
Water Pump: Service and Repair
REMOVAL
Fig. 2 Balance shaft drive & camshaft drive exploded view.
1. Drain coolant from cold engine by setting heater control lever to warm position and unscrew drain plug.
2. Disconnect negative battery cable.
3. Remove lower radiator hose.
4. Remove accessory drive belts.
5. Remove upper and lower front timing belt covers.
6. Rotate engine to TDC cylinder #1.
Crankshaft Timing Marks
7. Ensure alignment of timing marks on flywheel and clutch housing.