944 L4-2479cc 2.5L (1984)
Balance Shaft Gear: Technical Service Bulletins
Balance Shafts Spur Belt - Maintain Runing Direction
Subject
Spur Belt for Balance Shafts
Part Identifier
1381
Applies To
944
Group
13
Key Points
Maintain original running direction during repair
Number
84-03
August 31, 1984
New spur belts are marked with a paint dot an one side, The paint mark must be located to the outside during installation.
When removing an old spur belt, mark in a similar manner before removal, Ensure that the belt is reinstalled in the same position (running in the same
direction as originally installed).
A used belt running in the opposite direction from original could be destroyed after a short period of operation.