944 S L4-2479cc 2.5L DOHC (1987)
Brake Caliper and Repair Set Applications
944 Series
*
After stocks are used up, calipers with 36 mm/38 mm piston diameter will no longer be available. When repairing, use calipers with 36 mm/40 mm
piston diameter and install in pairs.
**
When used up, brake calipers with scraper ring will no longer be available. When repairing, use
calipers with dust caps and install only in pairs.
***
In production, brake calipers with dust caps were installed on the rear axle from VIN: 95 KN 150216.
Visual inspection of front calipers is necessary for caliper type identification.
****
Front and rear calipers require visual inspection to determine caliper type identification.
Brake Caliper and Repair Set Applications
928 Series
