944 S L4-2479cc 2.5L DOHC (1987)
TDC
10. Now turn crankshaft slowly until dial gage shows that piston has reached the upper limit of travel. With the crankshaft in this position, the
camshafts are at ignition TDC for cylinder 4.
11. Tighten temporary retaining bolts and central bolt. Tightening torque of central bolt: 65 - 70 Nm (48 - 52 ft lb).
12. Recheck by turning crankshaft through another 2 turns and checking setting.
13. Remove temporary retaining bolts and install distributor rotor.