944 S L4-2479cc 2.5L DOHC (1987)
Balance Shaft: Service and Repair
Installing Bearing Bridges of Compensating Shafts
Installing Bearing Bridges of Compensating Shafts
Crankcase upper and lower sections as well as bearing bridges of compensating shafts are machined together and must always be installed together.
Check codes.
In installed state it will be possible to read the codes of both bearing bridges from the front (as seen looking forward in car).
Picture shows the left compensating shaft.
In addition, the bearing bridges are stamped with 1 and 2.
1 = Right side