944 S L4-2479cc 2.5L DOHC (1987)
Alignment: Service and Repair
Front Suspension
Accurate front axle height adjustment is critical to toe-in, camber, and caster adjustments. Ensure tire pressures are at their specified values,
fuel tank is full, spare tire is in place, and a weight approximately the same as the driver, positioned on the driver's seat.
CAMBER & CASTER, ADJUST
Fig. 2 Front Caster & Camber Adjustment. 924S & 944 Models
1.
Adjust camber by turning eccentric bolt on lower strut mounting.
2.
On models w/steel control arms, adjust caster by moving rear of suspension control arm from side to side.
3.
On models w/aluminum control arms, adjust caster by loosening self locking nuts and turning caster eccentric until caster is within specifications,
Fig. 2, then torque nuts to 62 ft.lbs.