944 S L4-2479cc 2.5L DOHC (1987)
Air Bag: Service and Repair
Removing & Installing Driver Side Airbag Unit
1. Disconnect battery and cover over pole/battery.
2. Loosen fastening screws (2 pieces) with a screwdriver for socket head Torx T 30.
-
Tightening Torque: 10 Nm (7.5 ftlb)
3. Take apart plug connector.
Note
The airbag unit must always be put down so that the upholstered side is pointing upward.
The airbag unit must be stored under lock and key if removed for a lengthy period of time. Follow safety instructions.