944 S L4-2479cc 2.5L DOHC (1987)
Sunroof / Moonroof Switch: Service and Repair
Adjusting Sun Roof Microswitch on Electric Drive
Adjusting Lifting Sun Roof Microswitch On Electric Drive
Microswitches I and II can only be adjusted together. In longitudinal direction leave a 7 mm clearance between the outer edges of the microswitches and
the recess. In transverse direction they must be adjusted so that they switch reliably, but are not damaged mechanically by the lever. A clearance of 2.5
mm must be observed in the case of microswitch III.
Lever position:
1 - released
2 - locked
3 - open
Connections on the microswitches