944 S L4-2479cc 2.5L DOHC (1987)
Bell Housing: All Technical Service Bulletins
Clutch Housing - Dust Cap Must Be Installed
Subject:
Dust Cap in Clutch Housing
Model
924S, 944, 944S 944 Turbo
Group
3
Part Identifier
3065
Number
8711
December 4, 1987
In order to prevent dirt and moisture from entering the clutch area, the rubber dust cap (arrow) located at the lower left side of the clutch housing, must
be installed.
Dust Cap Part Number:
931 116 177 00
The dust cap must fit tightly in the clutch housing. If necessary, line the cap with adhesive tape for a tight fit.