944 S L4-2479cc 2.5L DOHC (1987)
15. Drive out dowel sleeve for dog on 1st and 2nd gear selector rod, while holding with a hammer. Turn dog to face up.
16. Drive out dowel sleeve for 3rd and 4th gear selector fork, while holding with a hammer.
17. Pull out selector rod for 3rd and 4th gears (selector fork remains in sliding sleeve). Do not loose small lock pin!
18. Unscrew bolt for operating lever.
19. Pull drive pinion and input shaft forward slightly. Remove input shaft with 3rd and 4th gear selector fork.
Note: For transmissions with reverse gear synchronization disconnect spring clamp for reverse gear on pinion shaft end and turn aside.
20. Pull drive pinion forward far enough so that selector rod.and selector fork for 1st and 2nd gears can be removed.
21. Swing out drive pinion.
