porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Actuators and Solenoids - Engine > < Campaign - Cruise Control Malfunction|Page 697
Page 5
background image

5.

As identification for the completion of this recall campaign, put a black paint dot on the metal sleeve of the cruise control cable. (Figure 3, Arrow
E)

Remove grease/oil from this metal sleeve prior to marking with paint dot.

6.

Close front hood.

Required Parts

Quantity

Part Number

Description

1

900 075 363 02

Bolt with crimped-on washer

1

N 011 524 7

Washer
Black paint

Required Tools

-

10 mm socket

-

Ratchet

-

Torque wrench

ADMINISTRATIVE PROCEDURE 
Recall N02

Rear Engine Compartment Cover Modification

Warranty Claims should be submitted via IDCS

Affected VINs:

WPOAA2968NS820066 to WPOAA296ONS820384
WPOCA2962NS840063 to WPOCA296ONS840644

Warranty Code:

R

Damage Code:

AN06 99 N02 2*

Labor Operation:

AN06 1900

Time Units:

20 TU

**Part Number(s):

900 075 363 02 (Qty. 1), bolt
N 011 524 7 (Qty. 1), washer

Warranty Parts $:

0.00 Item cost is below Warranty reimbursement level. Initial parts have been
shipped free of charge. (All Warranty Claims have a small parts allowance built into Warranty handling reimbursement.)

*Dealers on IDCS should use claim template option from IDCS.
**Note: 

All part numbers must be claimed for Government compliance.

In cases where the Recall cannot be performed, submit the information on a claim via IDCS with the appropriate disposition code by inserting the code
in the last digit of the damage code.

Owner Name and Address Chance

If owner name and/or address is shown incorrectly, submit correction using name/address change postcard from the Warranty and Maintenance Booklet
or Recall mailing, or report to Porsche Cars N.A. via IDCS to the Warranty Department of change, including VIN.

Actuators and Solenoids - Engine > < Campaign - Cruise Control Malfunction|Page 697