Boxster (986) F6-2.5L (1998)
-
Select 'Boxster' in the Vehicle type menu and confirm with the >> key
-
Select 'PCM' in the Control units selection menu and confirm with the >> key
-
Select 'PCM2 MMI' in the PCM2 function selection and confirm with the >> key
-
Select 'Input signals' in the PCM2 MMI function selection and confirm with the >> key
-
'Increment steps' is displayed on the Porsche System Tester II No. 9588. The function is activated by marking with
the > key and actuating the >> key
-
If functioning correctly, the relevant code appears on the tester's display field when the operating buttons are
activated
Single CD
The CD player is part of the PCM2. It is used to update the navigation system.
Special Function
The following functions can be run using this menu item:
-
Read address book
-
Write to address book
-
Read user data
-
Write user data
-
Read coding
-
Write coding
-
MOST actual installed components list
Voice Control System (VOCS)
The VOCS is designed as a module box which can be pushed into the PCM2 (optional). After the insertion, an electronic switch is opened and the
module is integrated into the MOST ring.
Drive Links
Drive links of the PCM2 can be activated with this menu item. This allows the function of the drive links to be assessed very quickly.
The following drive links can be activated with the Porsche System Tester II No. 9588:
-
Display colour black
-
Display colour "coloured bars"
-
Display colour blue
-
Display colour red
-
Display colour green
-
Display colour white
-
Set default values
-
Ring break diagnosis
-
Ring break line diagnosis
NOTE: The activated drive link is automatically switched off after approximately 20 seconds.
Menu item
Function
-
Display colour black
Using this menu item, the function Display colour black can be checked.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition
-
Select 'Boxster (986)' in the Vehicle type menu and confirm with the >> key
-
Select 'PCM' in the Control units menu and confirm with the >> key
-
Select 'PCM2 MMI' in the Boxster (986) PCM2 function selection and confirm with the >> key
-
Select 'Drive links' in the PCM2 MMI function selection and confirm with the >> key
-
Select "Display colour black" in the PCM2 MMI drive link function selection and confirm with the F8 key
-
The display must show the correct colour
Proceed in the same way with the following tests.
-
Display colour "coloured bars"
-
Display colour blue
-
Display colour red
-
Display colour green
-
Display colour white
-
Set default values
Using this menu item, you can read out the set default values from the PCM2 MMI.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition