Boxster (986) F6-2.5L (1998)
![background image](/porsche/boxster_(986)/f6-2.5l/Page-1657009.png)
1. Measure the dimensions -A = 10 mm- centrally starting from the inner edge of the tension bow.
2. Measure the dimension -B = 128 mm- starting from the beginning of the tension bow.
3. Measure the dimension -C = 193 mm- starting from the centre of the hole for dimension -B-.
4. Centre the measured dimensions using a prick punch. Drill the centrings with a drill bit dia. 5 mm.
Test And Adjusting Values
Materials And Tools
Item 1
Tightening Torques