Boxster (986) F6-2.5L (1998)
Retrofitting holder for seat wiring harness (Figure 2).
1.
Disconnect battery.
2.
Remove the left front seat.
3.
Repair the damaged wires on the seat wiring harness.
4.
Fasten the holder on the seat wiring harness with a least 3 layers of narrow cloth adhesive tape, see Figure 1 arrow B.
Note:
Attach the holder on the wiring harness so that the holder and seat plug are in a straight line. Distance between the seat plug and the center of the
holder: approx. 320 mm (Figure 3).
5.
Clip the holder into the available opening on the control unit, see Figure 1.
6.
Install seat.
7.
Connect battery.
Working Time
Literature