porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Customer Interest: > < Valve Tappets - Magnetization|Page 1545
Page 1
background image

Drive Belt: All Technical Service Bulletins
Power Steering - Belt Squeal Noises From Pump Area

Boxster

2/98

4898

Binder - 4, Running Gear

Noises from Power Steering Pump Area

Vehicle Type: Boxster

Model Year: As of 1997 (V)

Concern:
Belt squeal noises from the area of the hydraulic pump on vehicles equipped with manual transmission.

Information:
It is possible for some Boxsters equipped with a manual transmission to exhibit belt squeal type noises when the steering is at full lock and the engine
falls below idle speed.

Therefore, as of February 13, 1998 production, and M96/20 engine number 65 W 10520, the hydraulic pump on Boxsters equipped with manual
transmission is fitted with a new type steel pulley.

When addressing customer concerns in this area, it is recommended to replace the original aluminum hydraulic pump pulley with the new steel 

Note

The hydraulic pump need not be replaced!

Parts Information:
996 147 223 53 New/Belt pulley, steel, for Manual transmission vehicles.
996 147 223 60 Aluminum belt pulley, for Tiptronic transmission vehicles.

Labor:
Labor Time:

110 Time units

Labor Operation:

48 99 19 00

Literature:
Boxster Technical Manual, Group 4, Running gear
Section 48 98 19, Removing and installing hydraulic pump, pages 48-27 - 48-35.

Customer Interest: > < Valve Tappets - Magnetization|Page 1545