Boxster (986) F6-2.7L (2000)
Coding
Under the 'Modify coding' menu item, the PCM2 code can be extracted and the PCM2 coded on a vehicle-specific and country-specific basis.
Menu item
Function
-
Units
Using this menu item, you can code the relevant units.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select 'Boxster (986)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control units menu and confirm with the >> key.
-
Select 'PCM2 GW' in the Boxster (986) PCM2 function selection menu and confirm with the >> key.
-
Select 'Coding' in the PCM2 GW function selection menu and confirm with the >> key.
-
Select "Units" in the PCM2 GW coding menu and confirm with the >> key.
-
Select "the relevant units" from the menu item that is displayed and code them with the F8 key.
The following selection is available:
-
Metric, RoW (degree C, litre, km)
-
UK English (degree C, gallon, mph)
-
US English (degree F, gallon, mph)
-
Vehicle type vehicle
coding
Under this menu item, the PCM2 GW corresponding to the vehicle type can be coded.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select 'Boxster (986)' in the Vehicle type menu and confirm with the >> key.
-
Select 'PCM' in the Control unit menu and confirm with the >> key.
-
Select 'PCM2-GW' in the PCM2 function selection menu and confirm with the >> key.
-
Select 'Coding' in the PCM2 GW function selection menu and confirm with the >> key.
-
Select 'Vehicle type vehicle coding' in the Coding menu and confirm with the >> key.
-
Select "Boxster (986)" in the menu and code with the F8 key.
-
Vehicle version vehicle
coding
Under this menu item, the PCM2 GW corresponding to the vehicle version can be coded.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select 'Boxster (986)' in the Vehicle type menu and confirm with the >> key.