Boxster (987) F6-2.7L (2006)
Preliminary work
Preliminary work for compressor/evaporator line
Draining refrigerant.
Remove air-conditioning compressor from engine.
Removing compressor/evaporator line
INFORMATION:
-
Close off all lines and connections using suitable plugs during removal.
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
1. Unscrew fastening screw -2- on compressor, pull out line on compressor and remove it from support -7-.
2. Unscrew fastening nut -5- on cable holder, open cable holder and pull line out of rubber mounting -6-.
3. Unscrew fastening screw -4- on connection point and pull out line.