Boxster (987) F6-2.7L (2006)
If necessary, reposition the steering wheel. When doing this, seek the best position.
Mark for the center steering position
Warning
A triggering of the airbag (malfunction in the airbag system) caused by improper work on airbag components cannot be ruled out. In the
case of such a malfunction, an unsuitable steering wheel holder could cause injury or damage.
-
Use only steering wheel holders that do not project into the area of the airbag unit!
-
Observe safety regulations when working with airbag vehicles!
Steering wheel holder
Clamp steering wheel in center position with steering wheel holder -A-. Use only steering wheel holders that do not project into the area of the airbag
unit -B- If necessary, shorten the guiding rod of the steering wheel holder at top -Arrow-.
Loosen tie rod lock nut(s) -2- When loosening and tightening the tie rod lock nut(s) counter on the square of the tie rod -3-, with an open ended
wrench. Then adjust the toe on the hexagon -1- of the tie rod(s). Then tighten the tie rod lock nut(s) -2- to the prescribed tightening torque.
Adjusting toe