Boxster (987) F6-2.7L (2006)
Preliminary work
Preliminary work for line condenser-fluid tank
Removing left front wheel.
Remove front left wheel housing liner.
Draining refrigerant.
Removing the condenser-fluid tank line
INFORMATION: When loosening or tightening the M8 refrigerant lines on the condenser, always counter with a 21-mm open ended wrench.
1. Unscrew the fastening screw -1- for the line condenser and pull the line out of the condenser.
2. Pull the line out of the line holder.
3. Counter the fastening nuts -2- and open carefully.