Boxster (987) F6-2.7L (2006)
/f6-2.7l/Page-597002.png)
1. Lever selector cable off the ball pin and disengage from support bracket.
2. Place transmission jack under the transmission.
3. Unscrew fastening screws between the transmission and the transmission support.
Note: The fastening nuts of the transmission support must never be loosened at the hydraulic mount because otherwise the transmission brackets
will be damaged.
4. Unscrew fastening screws between the body and the hydraulic mount -arrows-.
A - Transmission support
B - Hydraulic mount
C - Fastening nut (never loosen)
