Boxster (987) F6-2.9L (2010)
3.2.2. Clip sound microphone/hands-free microphone (coding: white) --> Figure 19 -2- and hands-free microphone (coding: light blue) -->
Figure J9-1- into the trim panel.
4. Install actuating lever for on-board computer (retrofit kit).
4.1. Remove contact unit and electronic unit. --> Workshop Manual '94503700 Disassembling and assembling steering column switch'
4.2. Pull standard actuating lever for on-board computer --> Figure 20 -1- down and disengage it.
Engage actuating lever for on-board computer (retrofit kit) --> Figure 20 -2- and bend it up.
4.3. Fit electronic unit and contact unit. --> Workshop Manual '94503700 Disassembling and assembling steering column switch'
5. Concluding work
5.1. Install steering column switch. --> Workshop Manual '94501900 Removing and installing steering column switch'
5.2. Insert new tie-wraps --> Figure 21-1- into the trim panel under the dashboard.
5.3. Install trim panel under dashboard (driver's side). --> Workshop Manual701919 Removing and installing trim panel under dashboard'
5.4. Install PCM3.0. --> Workshop Manual '911019 Removing and installing PCM 3.0 display and operator control unit'
5.5. Connect the battery. --> Workshop Manual '2X00IN02 Work instructions after disconnecting the battery'
5.6. Connect battery charger. --> Workshop Manual '2X00IN03 Battery trickle charging'