Boxster (987) Info Display - Bluetooth(R) Interface
Work Procedure:
INFORMATION If a wire harness for microphones does not need to be installed (for details of options, see Step 2.1 Overview of installing
microphone wire harness), only Steps 1.1 and 4.4 have to be completed -Enable mobile phone preparation.
1. Preparatory work.
1.1 Connect battery charger. --> Workshop Manual '2X00IN03 Battery trickle charging'
1.2 Remove PCM3.0. --> Workshop Manual '911019 Removing and installing PCM 3.0 display and operator control unit'
1.3 Remove trim panel under dashboard. --> Workshop Manual 701919 Removing and installing trim panel under dashboard'-Checking
2. Install microphone wire harness.
INFORMATION The table shows whether a microphone wire harness needs to be retrofitted.
2.1 Overview of installing microphone wire harness:
Vehicle equipment
Microphone wire harness Installation
BOSE sound package (l-no. 680)
Yes
ASK sound package (l-no. 490)
Yes
Telephone module (l-no. 666)
No
Telephone module (l-no. 666)
in conjunction with l-nos. 490, 680.
No
Voice control system (l-no. 671)
No
Voice control system (l-no. 671)
in conjunction with l-nos. 490, 666, 680.
No
2.2 Prepare wire harness for microphone.