Boxster S (986) F6-3.2L (2001)
1. Installing tension strap on the main bow
-
Position the strap cover -37- using the holes provided on the tension strap -36- and press into the main bow -26- .
2. Installing tension strap on the corner bow
-
Position the strap cover -42- using the holes provided on the tension strap -40- and press into the corner bow -33- .
3. Installing tension strap on the roof frame
-
Position the tension strap -40- on the roof frame at the rear -22- and fasten the tension strap -40- with the fastening screws -43-. See
'Tightening torques'
4. Installing tension strap on the corner bow
Note! Use only aluminium rivets listed in the scope of parts
-
Position tension strap -44- on corner bow -33- on the holes provided, rivet on the tension strap -44- with the pop rivets -45- (parts
scope component of convertible-top covering)
5. Installing tension strap on the tension bow
Note! Use only -yellow galvanized- rivets listed in the scope of parts