Boxster S (986) F6-3.2L (2001)
Cylinder head, cylinder-head cover and camshaft bearing saddles were machined together and must always be installed together. Observe pairing
numbers.
Note The letters E or A before pairing numbers mean:
^
E = Bearing saddle for inlet camshaft
^
A = Bearing saddle for outlet camshaft
Preassembling camshafts
The inlet camshaft, outlet camshaft, chain tensioner and chain must be preassembled before installation in the cylinder head.
Camshaft allocation
Camshafts of cylinder bank 1 - 3
Identification on the camshaft
Inlet camshaft: 221.04/2.5 IN 13
Outlet camshaft: 222.04/2.5 EX 13
Camshafts of cylinder bank 4 - 6