porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Housing Assembly HVAC|Service and Repair|Page 4054 > < Housing Assembly HVAC|Service and Repair
Page 2
background image

8. Remove the radio and heating/air-conditioning controller. Unclip the switch panel on the left and on the right. Disconnect the electrical plug

connections. Undo the retaining frame in the center and remove it.

9. Remove the left side nozzle and disconnect the electrical plug connection. Unclip and remove the sun sensor cover and defrost panel.

10. Undo the interior monitoring system and disconnect the electrical plug connection.
11. Remove the air guide at the bottom right. Remove the passenger's airbag unit. Observe the safety regulations for handling airbag units.
12. Remove the front cover of the center console. Undo the fuse holder and diagnosis plug in the left footwell.

13. Undo the control panel at the bottom, center, left and right. Carefully remove the control panel and detach the loudspeaker cable.

14. Undo the center tunnel support on the support frame at the top and on the tunnel holder at the bottom.
15. Remove the left air guide. Only loosen the defrost channel. Undo and remove the center air distributor casing.
16. Disconnect the central plug connections (2 ea.) from the heater/air-conditioning unit.

Housing Assembly HVAC|Service and Repair|Page 4054 > < Housing Assembly HVAC|Service and Repair