Boxster S (986) F6-3.2L (2001)
17
Sealing Ring
18
Clamp
19
Coupling Sleeve
20
Connection Tube
21
Catalytic Converter, Cylinder Row 4-6
22
Gasket
23
Shield
24
Oxygen Sensor
25
Not Used
26
Sealing Ring
27
Plug (Exhaust Gas Sampling Point)
28
Sealing Ring
29
Hexagon Nut 8 mm
30
Reinforcing Plate
31
Hexagon Nut 8 mm
32
Washer
33
Hexagon Head Bolt:
With Tiptronic Transmission 8 x 20 mm
With Manual Transmission 8 x 60 mm
34
Adapter
35
Holder
36
Hexagon Nut 8 mm
37
Retainer Plate
38
Silencer
REMOVAL
-
Refer to the illustration above during exhaust system removal procedures.
-
When removing connecting tubes (5 and 20), slide sleeves (4 and 19) towards the catalytic converters only.
INSTALLATION
-
Refer to the illustration above and the information below when installing exhaust system components.
NOTE: After completion of exhaust system services, the ventilation opening of the heat protection lining must be checked for deformation and
straightened as necessary.
Hexagon Nut (1)
-Quantity used 5.
Hexagon Head Bolt 8 x 35 mm (2)
-
Quantity used 1.
Clamp (3)
-
Quantity used 1.
-
Always replace.