Boxster S (986) F6-3.2L (2001)
Camshaft Position Sensor: Service and Repair
Hall Sensor Rotor
Tools
Item
Designation
Special tool
Explanation
A
Extractor
Commercially available
B
Spacer
VW 545/2
C
Pressure plate
VW 402
D
Pressure piece
9628
Removal
1. Heat rotor area with a hot-air gun.
Pull off rotor with a commercially available extractor.
Place a spacer, e.g. VW 545/2, between the spindle and camshaft.
Installation
1. Thoroughly clean the rotor mounting surface.
Coat the seat area with Loctite 270.
2. Fit new rotor in the correct position by hand.