Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-18001.png)
Parking Assist Control Module: Service and Repair
Removing and installing control module for parking assistant
NOTE:
-
The control module for the parking assistant is located under the left front seat.
-
Before removing the control module remove the ignition key.
-
Remove front seat.
Removing control module for parking assistant
1. Unscrew both fastening screws -arrow- from the cover.
2. Turn the cover over and disconnect both electrical plugs.
3. Unscrew the control module from the cover with the two fastening screws.
Installing control module for parking assistant