Boxster S (986) F6-3.2L (2001)
Differential Output Shaft: Service and Repair
Short Flanged Shaft
Removing and installing sealing ring for short flanged shaft
Tools
Removal
1. Remove right rear wheel.
2. Uncouple drive shaft on the right on the transmission side and protect shaft from damage (use piece of hose with diameter of approximately 30
mm).
3. Detach stabilizer/stabilizer mount ball joint (A), toe control arm (B) and control arm (C) from wheel carrier, Disassembling and assembling wheel
suspension).
4. Place oil collection pan under the transmission.