Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-737001.png)
Fluid Transfer Tube: Service and Repair
Removing and installing inner oil tube
Tools
Notes on removal and installation
Removal
Notes Defective toroidal sealing rings at inner oil tube let ATF enter the differential, which becomes overfilled, and oil emerges from the vent of the
differential.
In general, a removed oil tube should be replaced.
The oil tube must be inserted only with special tool 3381. Otherwise there is a danger of leakage due to bending of the oil tube.
1. Remove hydraulic control unit.
2. Lever out oil tube with a screwdriver.
Installation
Note Always replace oil tube and toroidal sealing rings.