Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-744002.png)
3. Press flanged shaft out of mounting saddle.
4. Lever sealing ring out of mounting saddle with large screwdriver.
Installing
1. Push new sealing ring up to the stop with special tool 9615.
2. Press mounting saddle with ball bearing onto flanged shaft.
3. Insert snap ring.
4. Install flanged shaft; check and top up transmission oil in final drive.
Sealing Ring For Short Flanged Shaft
Removing and installing sealing ring for short flanged shaft
