Boxster S (986) F6-3.2L (2001)
/f6-3.2l/Page-787004.png)
NOTE:
-
The plug-in coupling -arrow-, including the holder, is already screwed together. Line -9- is only inserted onto line -8- in a straight line
(engaged)!
-
Line -9- is also joined together (engaged) with line -10- at the plug-in coupling (screw connection)! Before doing this, holder -C- and screw
connection -A- must be removed from line -10-! To do this, use a new screw connection -22- with the mounting plug already fitted (auxiliary
tool) -X-! Assembly/disassembly instructions are enclosed for each new screw connection -22-. The enclosed instructions can be referred to for
the procedure!
9. Clip pressure lines into the holder on the body.
10. Install the wheel housing liner and the centre trim.
11. Bleed the clutch.
