Boxster S (987) F6-3.2L (2005)
Removing Front Side Section Trim Panel (Passenger's Side)
2. Unscrew plastic nuts -2- and remove side section trim panel -3- -Arrow B-.
Installing front side section trim
Installing front side section trim panel (passenger's side)
1. Position side section trim panel -3- -Arrow A- and screw down with the plastic nuts -2-.
Installing Front Side Section Trim Panel (Passenger's Side)
2. Fasten carpet -1- at the bottom in the area of the A-pillar -Arrow B-Double-sided adhesive tape or suitable adhesive.
Installing front side section trim panel (driver's side)
1. Insert side section trim panel -3- einsetzen -Arrow A- and screw down with the fastening screws -2-. Tightening torque 2.0 ftlb.
Installing Front Side Section Trim Panel (Driver's Side)
2. Insert the fuse carrier cover -1- with both clips -4- into the lateral side section trim panel -2- and clip in -Arrow B-.
Removing and Installing Control Module Trim Panel
721619 Removing And Installing Control Module Trim Panel
Removing control module trim panel
Preliminary work
1. Remove front seat.
Removing control part trim panel