Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-796003.png)
4. Lift up buttons (two or three, depending on the vehicle type) and pull them out of the remote control housing.
Assembling remote control
INFORMATION: In the event of a complaint (remote control buttons too easily pressed), the silicone pad and buttons can be replaced with modified
spare parts.
1. Engage new buttons in the remote control housing.
2. Insert PCB -2- into the new silicone pad -1-.
3. Insert silicone pad -1- with PCB into the remote control housing.
4. Position the cover on the bottom part of the remote control and press together until the cover clicks into place.
