Boxster S (987) F6-3.4L (2008)
3.5 Press insert for locking mechanism down --> Figure 10 -arrow- until it engages in the center console.
Secure insert for locking mechanism with the screw --> Figure 10 -A-.
4
Fit center console. --> Workshop Manual '681719 Removing and installing centre console'
4.1 Tighten the screws -->Figure 11 - A-.
NOTE:
Continue to use the standard center console floor.
4.2 Fit center console floor and tighten the screw --> Figure 12 -A- on the center console floor.
5
Install console.
5.1 Connect connector --> Figure 13 -A- to the console and fit wire harness (retrofit kit) --> Figure 13 -C- in the locking lugs (cable guide) -->
Figure 13 -B- on the console.
ATTENTION