Boxster S (987) F6-3.4L (2008)
2. Remove retainer plate -3-.
INFORMATION: Two persons are needed to disengage and engage the rear apron.
3. Unclip rear apron at the sides and carefully pull it to the rear until the plug connection -1- can be reached.
4. Press locking lug on plug connection -1- ( -arrow A- ) and disconnect it -arrow B-.
5. Remove rear apron -1- ( -arrow- ).
Installing rear apron
Safety instructions for the heat shield
CAUTION: Assembly of deformed heat shields.
-
Damage will be caused through heat build up if deformed heat shields are installed.
-
Check heat shields for deformation, fixing of the aluminium braided cord, tears and missing or damaged fixing tabs.
-
Damaged or distorted heat shields must be straightened or replaced.