Boxster S (987) F6-3.4L (2008)
5. Screw in fastening screws -1- at the top and bottom of the rear apron -2-. Tightening torque: 2.8 Nm (2 ftlb.) ± 20 %
Dimensions of tailpipes
Gap dimensions of tailpipe
1. Check gap dimensions of tailpipe -1- with respect to the rear apron -2-, and adjust the tailpipe if necessary.
Projection from rear spoiler: -Y = 26.2 ± 2 mm-.
Distance from rear apron: -Z = 27 mm-.
Centre distance at the sides evenly to the left and right.
Subsequent work
1. After fitting the rear apron, check that the heat shields are fitted correctly, and adjust them if necessary. Refer to Removing and installing rear
bumper
2. Check rear gap dimensions and make adjustments if necessary. Refer to Diagram - body gap dimensions
3. Install rear spoiler. Refer to Removing and installing rear spoiler (I-no. XAL)
4. Install tail light on right and left. Refer to Removing and installing tail light
Removing and Installing Rear Spoiler
Removing And Installing Rear Spoiler
Technical values