Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-847011.png)
1.1. Sabre saw 00000
1.2. Measuring tape 00000
1.3. Commercially available hardwood block 00000
2. Make hardwood block for assembly fixtures -1- with the corresponding stated dimensions.
Removing the rear retaining strip
1. Unclipping wiring harness for rear apron
2. Unscrew fastening nuts -1- and take off rear retaining strip -2-. Check sheetmetal nuts -3-, replace if necessary.
Installing the rear retaining strip
