Boxster S (987) F6-3.4L (2008)
INFORMATION: However, the precondition for precise positioning of the retaining strip is that the rear lid is optimally adjusted and correctly locked
in the lock in accordance with the joining plan and the functional dimensions, before the rear retaining strip is assembled.
1. Check the function dimensions for the rear lid, and correct if necessary. Refer to Adjusting the rear lid
2. Move in assembly fixtures -1- at the measuring point -A = 276 mm- between the retaining strip -2- and rear lid -3-.
INFORMATION: Ensure that the distance from the retaining strip to the side panel is uniform on the right and the left.
3. Push retaining strip -2- upwards and screw down the two fastening nuts -4-. Tightening torque: 7 ftlb.
Subsequent work
Install rear apron. Refer to Removing and installing rear apron