Boxster S (987) F6-3.4L (2008)
INFORMATION:
-
When removing the support, do not loosen the retaining clips by placing the screwdriver between the retaining clips and the rear end ribs.
-
Use new retaining clips for installation.
1. Move retaining clips -3- as far as possible to one side and open up retaining clips with a screwdriver -4- ( -arrow A- ). Remove retaining clips -3-.
2. Disengage support -2- in -direction of arrow B- to remove it from the rear apron -1-.
Removing cap
1. Carefully press out the cap -2- with a screwdriver.
2. Pull the securing cord -3- for the cap out of the rear apron -1- ( -arrow- ).