Boxster S (987) F6-3.4L (2008)
Installing cap
1. Pull the securing cord -3- into the eyelet on the rear apron -2- ( -arrow- ).
2. Clip cap -2- into the rear apron -1-.
Installing support
1. Fit support -2- in -direction of arrow A-, align it and press the new retaining clips -3- on to secure it to the rear apron -1- ( -arrow B- ).
Subsequent work
INFORMATION: Only for USA/Canada version vehicles.
1. Install rear bumper horn. Refer to Removing and installing rear bumper horn
2. Install wiring harness for number plate light. Refer to Removing and installing wire for number plate light
3. Install number plate lights. Refer to Removing and installing number plate light