Boxster S (987) F6-3.4L (2008)
INFORMATION: The fixing clips for the door trim panel -1- must be unclipped from the door sub-frame in the specified sequence - a to i-.
2. Remove door trim panel.
2.1. On the door, affix adhesive tape to the area around the door trim panel -1-.
2.2. Insert a plastic wedge between the door trim panel -1- and door sub-frame -3-.
2.3. Carefully press the door trim panel -1- to one side -arrow A- as far as possible until the removal pliers 9760 can be inserted between the door
sub-frame -3- and fixing clip -2-.
2.4. Unclip the door trim panel -1- at all fixing clips -2-, using the removal pliers 9760 to remove it from the door sub-frame -3- ( -arrow B- ) and
unhook it from the sealing channel -arrow B- at the top.
Disconnecting the electrical plug connections